D&L Oil Tools has a full line of service tools to meet your needs.  Featured products include:

CEMENT RETAINER

The Cement Retainer is a drillable packer that provides the end user with a tool that will consistently contain well pressures at elevated temperatures and pressures. This tool is designed to be used for remedial cementing operations and light service applications. This tool permits faster removal from the well with either rotary or cable tool methods due to its compact size and the selection of high quality construction materials.

CIW BRIDGE PLUG

The CIW Bridge Plug is designed to have excellent running characteristics and secure sets. This plug can be set on different types of Wireline Pressure Setting Tools as well as with Hydraulic Setting Tools. This plug is designed for rapid drill-out while maintaining sufficient strength during the set. It is designed for high differential pressures and temperatures up to 250° F with standard nitrile element and o-ring. Different elastomers are available for higher temperatures.
The short, compact, interlocked construction assures the CIW Bridge Plug will provide faster, safer run-in, dependable set and pack-off, and hold pressure that is safe for the casing weight and grade. The interlock construction and compact size requires minimal material removal during drill out.

CR BRIDGE PLUG

The CR Bridge Plug provides the end user with tools that will consistently contain well pressures at elevated temperatures and pressures. This plug permits faster removal from the well with either rotary or cable tool methods due to its compact size and the selection of high quality construction material.
The short, compact, interlocked construction assures the user that the CR Bridge Plug will provide faster, safer run-in, dependable set and pack-off and hold pressure that is safe for the casing weight and grade. The interlock construction and compact size requires minimal material removal during drill out. The outside diameter of these products has been held to a minimum to provide maximum tool-to-casing clearance for safe running and maximum fluid by-pass area during displacement procedures even in heavy mud systems.
A Wireline Adapter Kit (WLAK) and Hydraulic Setting Tool are used for setting CR Bridge Plugs.

NOTE: The CR Bridge Plug is designed to provide a temporary wellbore seal. For a permanent wellbore seal, cement must be set on top of the plug.

  • Updates

    /

    April 2, 2015

    Featured products: D&L Service Tools

    Imagine twenty-five years of quality, dependability and precision built into every tool we make. That's the D&L difference. Our expertise ...

  • Updates

    /

    September 21, 2016

    New Product Development – Meet Tom Myerley, Senior Design Engineer

    This is the fifth installment of our 2016 "Meet the Team" series, featuring the D&L Oil Tools Engineering team.The D&L ...