Service Tools

CR Bridge Plug

The CR Bridge Plug provides the end user with tools that will consistently contain well pressures at elevated temperatures and pressures. This plug permits faster removal from the well with either rotary or cable tool methods due to its compact size and the selection of high quality construction material.

The short, compact, interlocked construction assures the user that the CR Bridge Plug will provide faster, safer run-in, dependable set and pack-off and hold pressure that is safe for the casing weight and grade. The interlock construction and compact size requires minimal material removal during drill out. The outside diameter of these products has been held to a minimum to provide maximum tool-to-casing clearance for safe running and maximum fluid by-pass area during displacement procedures even in heavy mud systems.

A Wireline Adapter Kit (WLAK) and Hydraulic Setting Tool are used for setting CR Bridge Plugs.

NOTE: The CR Bridge Plug is designed to provide a temporary wellbore seal. For a permanent wellbore seal, cement must be set on top of the plug.

Special Features

  • Convertible to Cement Retainer
  • Sets on wireline or on tubing with mechanical setting tool
CR Bridge Plug

Product Specifications

Size (inches) Weight (lbs/ft) Recommended Hole Size (inches) Tool OD (inches) Part Number Mechanical Set Part Number Wireline Set Technical Data Mechanical Set Technical Data Wireline Set
4-1/2 9.5 - 15.1 3.826 - 4.090 3.612 84245MS 84245WS PDF PDF
5 11.5 - 18.0 4.276 - 4.560 3.937 84250MS 84250WS
5-1/2 14.0 - 23.0 4.670 - 5.012 4.315 84255MS 84255WS PDF PDF
6-5/8 17.0 - 32.0 5.675 - 6.135 5.375 84265MS 84265WS
7 17.0 - 35.0 6.004 - 6.538 5.680 84270MS 84270WS PDF PDF
7-5/8 20.0 - 39.0 6.625 - 7.125 6.313 84275MS 84275WS
8-5/8 24.0 - 52.0 7.435 - 8.097 7.125 84285MS 84285WS
9-5/8 29.3 - 58.4 8.435 - 9.063 8.125 84295MS 84295WS PDF PDF
10-3/4 32.75 - 60.7 9.660 - 10.192 9.437 84210MS 84210WS
11-3/4 38.0 - 60.0 10.772 - 11.150 10.437 84211MS 84211WS
13-3/8 48.0 - 72.0 12.347 - 12.715 11.883 84213MS 84213WS PDF PDF

OPTIONS: MS (Mechanical Set), WS (Wireline Set)

NOTE 1: Conversion Kits are available for converting either way.

NOTE 2: All pricing includes standard Nitrile trim. Other sizes and connections available upon request.

NOTE 3: Not compatible with setting tools from other manufacturers.

Packing quality and service
into everything we do