Anchors
DL-CS Anchor
The DL-CS Anchor is used to anchor downhole equipment from rotating and/or moving up the hole. The anchor is designed to resist up to 12,000 Ft-lbs of torque with a unique cone and slip design while preventing movement up or down hole. It can be set in casing or open hole.
Special Features
- Heavy duty design
- Hex mandrel for torque transmission
- Adjustable shear set and release
Product Specifications
Size (inches) | Weight (lbs/ft) | Recommended Hole Size (inches) | Tool OD (inches) | Thread Connections (Box Up / Pin Down) |
Part Number | Technical Data |
---|---|---|---|---|---|---|
5-1/2 | 13.0 - 23.0 | 4.670 - 5.044 | 4.375 | 2-7/8 IF TOOL JOINT / 2-3/8 IF TOOL JOINT | 32255 | |
7 | 17.0 - 23.0 | 6.366 - 6.538 | 6.125 | 3-1/2 IF TOOL JOINT / NO THREAD | 32272 | |
7 | 26.0 - 35.0 | 6.004 - 6.276 | 5.875 | 3-1/2 IF TOOL JOINT / NO THREAD | 32270 | |
7-5/8 | 24.0 - 39.0 | 6.625 - 7.025 | 6.375 | 3-1/2 IF TOOL JOINT / NO THREAD | 32275 | |
8-5/8 | 24.0 - 40.0 | 7.725 - 8.097 | 7.500 | 3-1/2 IF TOOL JOINT / NO THREAD | 32285 | |
8-5/8 | 24.0 - 40.0 | 7.725 - 8.097 | 7.500 | 4-1/2 IF TOOL JOINT / NO THREAD | 32285-XBEE |
NOTE: All pricing includes standard Nitrile trim. Other sizes and connections available upon request.