Anchors

Drag Block Tubing Anchor/Catcher

The Drag Block Tubing Anchor/Catcher (DB Anchor) is a retrievable positive-action tubing anchor designed to hold the tubing string in tension or compression. It has drag blocks to allow the anchor to be run deeper than conventional drag spring anchors. The anchor prevents movement of the tubing during pumping strokes; and holds it stationary if it should part. The use of a tension tubing anchor increases pump efficiency, reduces rod and tubing wear, and keeps tubing and rods from falling into the well in case of a part.

Special Features

  • Enclosed slips
  • Rotational release or shear release
  • Safety release value easily adjusted
Drag Block Tubing Anchor/Catcher

Product Specifications

Size (inches) Weight (lbs/ft) Recommended Hole Size (inches) Gage OD
(inches)
Max OD (inches) Tool ID (inches) Thread Connections (Box Up / Pin Down) Part Number Technical Data
4-1/2 9.5 - 13.5 3.920 - 4.090 3.750 - 1.94 2-3/8 EUE 32545 PDF
5-1/2 13.0 - 20.0 4.778 - 5.044 4.500 4.6401 2.00 2-3/8 EUE 32555 PDF
5-1/2 13.0 - 20.0 4.778 - 5.044 4.500 4.6401 2.44 2-7/8 EUE 32556 PDF
7 17.0 - 32.0 6.094 - 6.538 5.750 5.8541 2.50 2-7/8 EUE 32570 PDF
7 17.0 - 32.0 6.094 - 6.538 5.750 5.8541 3.00 3-1/2 EUE 32573 PDF
7-5/8 24.0 - 39.0 6.625 - 7.025 6.400 6.4041 2.50 2-7/8 EUE 32575 PDF
8-5/8 24.0 - 40.0 7.725 - 8.097 7.500 7.6871 4.00 4-1/2 EUE 32585
9-5/8 32.3 - 53.5 8.535 - 9.001 8.250 - 3.00 3-1/2 EUE 32595-XBAE PDF
9-5/8 32.3 - 53.5 8.535 - 9.001 8.250 - 4.00 4-1/2 EUE 32595 PDF
4 9.5 - 11.0 3.476 - 3.548 3.281 3.281 1.94 2-3/8 EUE 32040 PDF

1 Maximum OD is across retracted drag blocks.

NOTE: All pricing includes standard Nitrile trim. Other sizes and connections available upon request.

Packing quality and service
into everything we do