The Adjustable Union allows the distance between two pieces of equipment to be adjusted per downhole requirements prior to placing equipment.
The Annulus Operated Tubing Drain is an annulus pressure operated drain valve that can be opened to allow fluid to drain from the tubing on a trip out.
The Bit Release Joint is used in operations for drilling out cement, cast iron bridge plugs, composite bridge plugs, and other drillable tools and thereby leaving the drill string intact as the production string.
The Casing Scraper is used to remove scale and debris from the casing ID. The use of the scraper helps to ensure that tools can properly run and set in casing.
The Ceramic Disc Sub is a simple and economical tool used for snubbing and pump-out applications.
The Cross Flow Assembly is designed to allow for a fluid path between the casing annulus and tailpipe below a packer.
The D&L On/Off Tool is a fully machined, weld-free tubing seal receptacle allowing isolation of a lower zone using a wireline blanking plug.
The Downhole Casing Swivel isolates tools, casing, or tubing from rotation above.
The Downhole Tubing Swivel isolates tools, casing, or tubing from rotation above.
The Expansion Joint is used to allow expansion and contraction during injection or production operations.
The Fluid Dump Valve is a tubing pressure operated bypass valve that can be opened to allow fluid to drain from the tubing on a trip out.
The Mechanical Collar Locator is designed to provide a positive indication when pulled through each casing collar.
The Profile Nipple is designed to allow common slickline plugs and equipment to be placed successfully downhole.
The patented ProTension™ Safe Tension Tool (STT) was designed as a safety tool to eliminate the potential for loss of well control when pulling a tubing string into tension.
The Pump-Out Cementing Sleeve is used for cementing tubing strings in both cased and open holes.
The Pump-Out Plug is available with a variety of threads allowing installation to the bottom of the tubing string to isolate the tubing from the annulus.
The Rotational Ball Valve is a designed for downhole well shut off with a simple 1/4 turn operation.
The Running Tool for the Type E Valve is designed to be used with the Type E Valve to convert double grip mechanical packers (like the ASI-X Packer) into a retrievable bridge plug.
The Safety Joint allows positive release of the tubing string in completions where retrieval problems are anticipated.
The Safety Joint allows positive release of the tubing string in completions where retrieval problems are anticipated.
The Safety Joint allows positive release of the tubing string in completions where retrieval problems are anticipated.
The Surface Tubing Swivel allows tubing to freely rotate under load during well service operations.
The Telescoping Union is used to allow expansion and contraction during injection or production operations.
The Type E Valve converts double-grip mechanical packers like the ASI-X Packer into Retrievable Bridge Plugs.
