LC Hydraulic Setting Tool
The LC Hydraulic Setting Tool (HST) is used to set packers and plugs on tubing that are normally set on wireline. This allows setting in high-angle wells or deviated wells where it is difficult to use wireline equipment. The LC HST allows for packers and plugs to be set with a combination of hydraulic and mechanical forces. This can reduce the setting pressure needed by supplementing the set with tubing tension. A single size LC HST may be used to set a multitude of packer sizes by simply attaching the proper size LC Hydraulic Adapter Kit.
- Heavy-duty design
- Multiple setting chambers for lower setting pressures
- Operable in heavy mud systems
- Can be equipped to operate in high temperatures
- Circulation through the tool during run in
|Setting Tool Size||Setting Area (in2/Cylinder)||Tool OD (inches)||Tool ID (inches)||Thread Connections (Box Up / Pin Down)||Part Number||Technical Data|
|LC-20||4.60||4.375||2.00||3-1/2 IF TOOL JOINT||39420|
|LC-20HD||4.60||4.375||1.75||3-1/2 IF TOOL JOINT||39420HD|
NOTE: All pricing includes standard Nitrile trim. Other sizes and connections available upon request.