Mechanical Set Packers

AS-III Packer

The AS-III Packer is a single-grip packer with no upper hold-down for use where no differential pressure from below is present. From the packing elements down, this packer operates identically to the AS-II Packer. This packer also features a large by-pass area to prevent swabbing when running or retrieving. This packer is ideal for isolating casing holes or perforations when used as the lower packer in conjunction with the Snapset Packer as the upper packer.

Special Features

  • Large internal by-pass
  • 1/4 turn set / straight pick-up release
  • Additional J-slot arrangements available
AS-III Packer

Product Specifications

Size (inches) Weight (lbs/ft) Recommended Hole Size (inches) Gage OD
(inches)
Max OD (inches) Tool ID (inches)

Thread Connections
(Box Up / Pin Down)

Part Number Technical Data
3-1/2 7.7 - 10.2 2.922 - 3.068 2.781 - 1.25 1.900 NUE 63135RS  
4-1/2 9.5 - 13.5 3.920 - 4.090 3.750 - 1.94 2-3/8 EUE 63145RS PDF
4-1/2 13.5 - 15.1 3.826 - 3.920 3.650 - 1.94 2-3/8 EUE 63144RS PDF
5 11.5 - 15.0 4.408 - 4.560 4.125 4.2201 1.94 2-3/8 EUE 63150RS PDF
5-1/2 14.0 - 20.0 4.778 - 5.012 4.625 - 1.94 2-3/8 EUE 63155RS PDF
5-1/2 14.0 - 20.0 4.778 - 5.012 4.625 - 2.38 2-7/8 EUE 63156RS PDF
5-1/2 20.0 - 23.0 4.670 - 4.778 4.500 - 2.00 2-3/8 EUE 63157RS PDF
5-1/2 20.0 - 23.0 4.670 - 4.778 4.500 - 2.38 2-7/8 EUE 63159RS PDF
5-3/4 21.5 - 24.0 4.784 - 4.879 4.720 - 2.38 2-7/8 EUE 63158Z  
6-5/8 17.0 - 2