D&L has accessories available to run in conjunction with the Abandonment Packer: a High Load Swivel and a Plug Catcher.
The Abandonment Valve provides a means for temporarily abandoning a well without tripping out a workstring.
The AS Retrievable Bridge Plug is a high pressure plug for multiple zone and selective single zone operations such as acidizing, fracturing, cementing and testing.
The Axial Installation (AI) HD Packer is a heavy-duty service packer ideally suited for all types of squeeze cementing, formation fracturing, high pressure acidizing, etc.
The Ball Abandonment Valve provides a means for temporarily abandoning a well without tripping out a workstring.
The Cement Retainer is a drillable packer that provides the end user with a tool that will consistently contain well pressures at elevated temperatures and pressures.
The CIW Bridge Plug is designed to have excellent running characteristics and secure sets.
The Compression Unloader is designed as a high-pressure accessory for compression set packers.
The CR Bridge Plug provides the end user with tools that will consistently contain well pressures at elevated temperatures and pressures.
The DA-II Unloader is designed as a high-pressure accessory for compression set packers.
The DLT Retrievable Packer is a compression set packer with hydraulic hold down that is designed to provide an extra measure of dependability for rugged service.
The Dual Torque Bumper Sub is a heavy duty travel joint that is designed to transmit high right- or left- hand torque.
The HD Abandonment Packer is a heavy duty service packer ideally suited for all types of squeeze cementing, formation fracturing, high pressure acidizing, etc.
The HD Retrievable Packer is a heavy duty service packer ideally suited for all types of squeeze cementing, formation fracturing, high pressure acidizing, etc.
The Latch Locator for Cement Retainer is designed to be run on tubing and is used to manipulate the Cement Retainer collet (a.k.a. sleeve valve) during cementing operations.
The LC Hydraulic Setting Tool (HST) is used to set packers and plugs on tubing that are normally set on wireline.
The Mechanical Setting Tool (MST) is designed to run and mechanically set a Cement Retainer or converted Bridge Plug at any depth on tubing or drill pipe.
The Model “H” Hydraulic Setting Assembly (HST) is a hydraulic setting tool designed for setting packers and plugs without pipe manipulations.
The SC Tension Unloader provides a means of equalizing tubing and annulus pressures when used with a tension packer.
The LC Setting Adapter Kit for Permapak Packers is used to tie the packer to a the D&L LC Hydraulic Setting Tool so that the packer can be set.
The Spring Loaded Retrieving Tool is used to run and retrieve the AS Retrievable Bridge Plug.
The Storm Valve is designed to run above a compression set packer similar to the DLT Retrievable Packer.
The Stradasnap Packer consists of a modified Snapset II Packer combined with an AS-III Packer.
The Type C Perforation Wash Tool is for washing or acidizing perforations in casing and sand screens.
The Type T Squeeze Packer is a versatile, easy to use tension set tool which holds differential pressure from above or below.
The V-III Unloader is designed as a high-pressure accessory for the DLT Retrievable Packer designed to withstand severe operating conditions.
The Wireline Adapter Kit (WLAK) for the ASW Retrievable Bridge Plug is used to set the ASW Retrievable Bridge Plug on electric wireline or with a hydraulic setting assembly on tubing.
The Wireline Adapter Kit (WLAK) for Cement Retainers and CR Bridge Plugs is used to set Cement Retainers and CR Bridge Plugs on electric wireline or with a hydraulic setting assembly on tubing.
The Wireline Adapter Kit (WLAK) for CIW Bridge Plugs is used to set CIW Bridge Plugs on electric wireline or with a hydraulic setting assembly on tubing.
The WR Bridge Plug is a wireline set, wireline retrieve, packer-type bridge plug capable of holding differential pressure from above or below.
